Inleiding

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

Slide the notch downward while pulling the back cover off to remove it.
  • Slide the notch downward while pulling the back cover off to remove it.

Voeg opmerking toe

Use your fingers to push the battery upward from the bottom.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

Voeg opmerking toe

  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

Voeg opmerking toe

  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

Voeg opmerking toe

  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

Voeg opmerking toe

  • Carefully pry off the connection between the headphone jack and logic board.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Lid sinds: 14-04-10

7 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 29-61, Johann Spring 2010 Lid van Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,241