Repareer je spullen

Recht op reparatie

Winkel

Disassembling Motorola i850 LCD Board

Geschreven door: Andrew Aw (en 3 andere bijdragers)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Gemiddeld

Stappen

11

Tijd vereist

10 - 15 minuten

Secties

1

Markeringen

0

Inleiding

The removal and replacement of the LCD board.

  1. Open the flip cover of the phone with the LCD screen facing towards you.

    • Open the flip cover of the phone with the LCD screen facing towards you.

    Bewerken

  2. Use a Razor Blade to remove the screw covers. Razor Blade is very sharp. Use caution.

    • Use a Razor Blade to remove the screw covers.

    • Razor Blade is very sharp. Use caution.

    Bewerken

  3. Unscrew the screws using a Phillips #00 Screwdriver.

    • Unscrew the screws using a Phillips #00 Screwdriver.

    Bewerken

  4. Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

    • Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

    Bewerken

  6. Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

    • Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

    Bewerken

  7. Partially close the flip cover of the phone in order to take off the outer case.

    • Partially close the flip cover of the phone in order to take off the outer case.

    Bewerken

  8. Completely remove the outer casing from the phone.

    • Completely remove the outer casing from the phone.

    Bewerken

  9. Place your thumb underneath the protective metal covering to remove it from the phone. Place your thumb underneath the protective metal covering to remove it from the phone.

    • Place your thumb underneath the protective metal covering to remove it from the phone.

    Bewerken

  10. Gently detach the black microchip from the phone with a Tweezer.

    • Gently detach the black microchip from the phone with a Tweezer.

    Bewerken

  11. Prop out the LCD board from the phone using your fingertips.

    • Prop out the LCD board from the phone using your fingertips.

    Bewerken

  12. Remove the LCD board from the phone by grabbing the bottom side of the LCD board. Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

    • Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Andrew Aw

Lid sinds: 08-04-10

1 Reputatie

2 handleidingen geschreven

Badges: 4

+1 extra badge

Team

Cal Poly, Team 34-56, Forte Spring 2010 Lid van Cal Poly, Team 34-56, Forte Spring 2010

CPSU-FORTE-S10S34G56

4 Leden

10 handleidingen geschreven

0 Opmerkingen

Voeg een opmerking toe

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 2,297