Inleiding

Disassembling top half to get to connector ribbon, inside screen, and speaker.

Pull at top of faceplate, and it will pop off.
  • Pull at top of faceplate, and it will pop off.

Voeg opmerking toe

Unscrew four screws on front cover.
  • Unscrew four screws on front cover.

Voeg opmerking toe

Slide out metallic silver cover.
  • Slide out metallic silver cover.

  • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

Voeg opmerking toe

Use a tool to wedge in between the silver and black parts on the cover.
  • Use a tool to wedge in between the silver and black parts on the cover.

  • Silver part should now snap off.

Voeg opmerking toe

Black rubber part may now be easily removed.
  • Black rubber part may now be easily removed.

Voeg opmerking toe

Use a soldering iron to disconnect the connector ribbon from the phone.
  • Use a soldering iron to disconnect the connector ribbon from the phone.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

Lid sinds: 07-05-10

1 Reputatie

14 handleidingen geschreven

Team

Cal Poly, Team 6-16, Maness Spring 2010 Lid van Cal Poly, Team 6-16, Maness Spring 2010

CPSU-MANESS-S10S6G16

4 Leden

14 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 2,514