Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Inleiding

With this guide you can take your MM-4 from one solid brick of a speaker to four parts and a bunch of screws. This is useful if you are replacing a bad driver, or if the connector becomes damaged and you need to replace it.

Wat je nodig hebt

Stap 1 Case

Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case, Case: stap 1, afbeelding 1 van 2

Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case, Case: stap 1, afbeelding 2 van 2

Turn the speaker face down, so the connector side is up.
Remove the four #2 Philips screws on the back plate.

Vertaal

Stap 2

Remove the foam insert to expose the two spade connectors.
Carefully separate the connectors

Vertaal

Stap 3

Turn the speaker so the grill side is up.
Remove the four screws on the grill. I had to use a t-10 Torx bit to remove them.
The grill is not glued on, but may require a bit of prying to remove.

Vertaal

Stap 4

Remove the four silver bolts holding the speaker in place. These bolts also have threads inset for the grill screws to fit into.
This is a pretty quick and easy teardown, not too many parts in this one. The meyer speaker's part number is ST-164. It's a 16 Ohm driver.

Vertaal