Inleiding

There are a lot of items behind the dash board of a W123 that may eventually need service, anything from various relays, to one of several vacuum actuators for the climate control vents and flaps.

One way to get easier access to several of these parts is to remove the glove box liner. Learn how here.

Onderdelen

Geen onderdelen nodig.

Start by opening the glove box.
  • Start by opening the glove box.

Voeg opmerking toe

Remove the two phillips screws in the glove box door catch, then remove it.
  • Remove the two phillips screws in the glove box door catch, then remove it.

Voeg opmerking toe

  • Gently pry apart the expansion plug in the glove box clips. There will be a row of them on top, and on the bottom.

  • Once you've pried it out part of the way you can pull it the rest of the way out by hand, or gently with needle nose pliers.

Voeg opmerking toe

  • You can then pry the clips out of the liner. Remove them all.

Voeg opmerking toe

  • Gently pry down the cover for the glove box lamp.

Voeg opmerking toe

  • Now unplug the two connections from the lamp and remove the lamp housing.

  • Be sure to make note of the orientation of the two wires for re-installation.

Voeg opmerking toe

  • Now the glove box liner will pull out by hand.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Nicolas Siemsen

Lid sinds: 06-12-13

29.208 Reputatie

79 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

277 Leden

751 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 3

Afgelopen 7 Dagen: 14

Afgelopen 30 Dagen: 75

Altijd: 5,663