Inleiding

The Macintosh IIsi has a case fan mouted on inside back of the computer case.

The fan recieves power from two contacts on the logic board and has no connector.
  • The fan recieves power from two contacts on the logic board and has no connector.

Voeg opmerking toe

In all of the years that I have worked on this machine, I have found no good way to remove the fan. The best way to start, is to push in here on the side of the fan. Being careful not to exert too much force, try to push in, and wiggle the fan outward as such. (2nd Photo)
  • In all of the years that I have worked on this machine, I have found no good way to remove the fan.

  • The best way to start, is to push in here on the side of the fan.

  • Being careful not to exert too much force, try to push in, and wiggle the fan outward as such. (2nd Photo)

  • You can now lift the fan all the way out, and remove it.

  • The Fan Power Contacts on the Logic Board:

There is no need to pull out the fan. Just take a knife and you can squeeze the tab in step 7

Willy Kaiser - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Chris Green

Lid sinds: 11-10-09

31.987 Reputatie

47 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

277 Leden

724 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,561