Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Disassembling Kodak Easyshare C813 Back Cover

Wat je nodig hebt

  1. Disassembling Kodak Easyshare C813 Back Cover, Battery: stap 1, afbeelding 1 van 1
    • Turn off camera by firmly pressing the power button that is located on the top of the camera near the selector dial.

  2. Disassembling Kodak Easyshare C813 Back Cover: stap 2, afbeelding 1 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 2, afbeelding 2 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 2, afbeelding 3 van 3
    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

  3. Disassembling Kodak Easyshare C813 Back Cover, Back Cover: stap 3, afbeelding 1 van 1
    • Before removing back cover, it is advisable to use an anti-static wrist strap to prevent damage to electronics.

  4. Disassembling Kodak Easyshare C813 Back Cover: stap 4, afbeelding 1 van 1
    • Turn the camera off by firmly pressing the power button located on top of the camera.

  5. Disassembling Kodak Easyshare C813 Back Cover: stap 5, afbeelding 1 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 5, afbeelding 2 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 5, afbeelding 3 van 3
    • Locate the 7 screws holding the back cover on.

    • Three screws are located on the bottom of the camera.

    • Two screws are located on the side shown in the photograph.

    • Two final screws are located on the opposite side shown in the photograph.

  6. Disassembling Kodak Easyshare C813 Back Cover: stap 6, afbeelding 1 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 6, afbeelding 2 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 6, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    Phillips #00 Screwdriver
    $5.49
    Koop
    • Remove all 7 screws:

    • Hold the camera firmly with one hand so that you can still see a screw.

    • Place the Philips 00(Found here)screwdriver into the screw.

    • Turn the screwdriver to the left until it is free.

    • Repeat for the remaining screws.

  7. Disassembling Kodak Easyshare C813 Back Cover: stap 7, afbeelding 1 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 7, afbeelding 2 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 7, afbeelding 3 van 3
    • Use plastic opening tools to slightly open the side of the case.

    • Insert a plastic opening tool and apply pressure to the internal three tabs at the top.

    • The first two are near the words "3X Optical Zoom".

    • The third is near the shutter button.

  8. Disassembling Kodak Easyshare C813 Back Cover: stap 8, afbeelding 1 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 8, afbeelding 2 van 3 Disassembling Kodak Easyshare C813 Back Cover: stap 8, afbeelding 3 van 3
    • Gently pull apart the back cover from the rest of the camera.

    • Make sure there are no more screws or tabs keeping the cover on.

    • Use the plastic opening tool to separate any sides still closely connected.

Eindstreep

Één andere persoon heeft deze handleiding voltooid.

Susan Marano

Lid sinds: 04/15/10

336 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 24-22, Regan Spring 2010 Lid van Cal Poly, Team 24-22, Regan Spring 2010

CPSU-REGAN-S10S24G22

4 Leden

20 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 4

Altijd: 2,362