Inleiding

These instructions will demonstrate how to remove the main LCD screen from the KDDI Kyocera A5521K.

Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.
  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

Voeg opmerking toe

Remove the screws using a Y0 screwdriver.
  • Remove the screws using a Y0 screwdriver.

Voeg opmerking toe

  • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

Voeg opmerking toe

  • Use the Y0 screwdriver to remove the screws.

Voeg opmerking toe

  • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

Voeg opmerking toe

  • Separate the faceplate from the phone.

Voeg opmerking toe

  • Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip).

Voeg opmerking toe

  • Carefully pry up the camera unit with a spudger.

    • Be careful not to damage the camera unit.

    • The camera should now be separated from the phone.

Voeg opmerking toe

  • Remove the flexible circuit shown using tweezers (or use your fingers if you can manage a firm grip).

Voeg opmerking toe

  • Unplug the circuit connector.

Voeg opmerking toe

  • Grab the phone with both hands.

  • Turnover the phone so that the main screen faces you.

  • Firmly grasp the edges between your thumbs and fingers.

  • Carefully push in the LCD screen from the remainder of the phone.

    • Be careful not to break the LCD screen.

Voeg opmerking toe

  • The LCD screen and circuit board should now be partly detached from the frame.

Voeg opmerking toe

  • Turn over the phone.

  • Separate the circuit board from the back of the LCD screen.

Voeg opmerking toe

  • Remove the LCD screen from the phone.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Lid sinds: 15-04-10

133 Reputatie

10 handleidingen geschreven

Team

Cal Poly, Team 28-25, Regan Spring 2010 Lid van Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Leden

20 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 6

Altijd: 1,533