Inleiding

These instructions will demonstrate how to remove the keyboard from the KDDI Kyocera A5521K.

Onderdelen

Geen onderdelen nodig.

Turn the phone over to expose the battery cover. Apply pressure to the back of the battery cover to slide it down. The battery cover is now separate from the phone.
  • Turn the phone over to expose the battery cover.

  • Apply pressure to the back of the battery cover to slide it down.

  • The battery cover is now separate from the phone.

Voeg opmerking toe

Remove the battery by pushing it up and out from the bottom. The battery, cover, and phone should now be separated. The battery, cover, and phone should now be separated.
  • Remove the battery by pushing it up and out from the bottom.

  • The battery, cover, and phone should now be separated.

Voeg opmerking toe

Remove the four screws with the Y0 screwdriver. Remove the four screws with the Y0 screwdriver.
  • Remove the four screws with the Y0 screwdriver.

Voeg opmerking toe

Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws. Remove the two screws with a Y0 screwdriver.
  • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

  • Remove the two screws with a Y0 screwdriver.

Voeg opmerking toe

Rotate the phone 180 degrees. Carefully separate the back plate from the remainder of the phone. The back plate should now be detached from the rest of the phone.
  • Rotate the phone 180 degrees.

  • Carefully separate the back plate from the remainder of the phone.

  • The back plate should now be detached from the rest of the phone.

Voeg opmerking toe

Lift up the bottom of the logic board. Carefully remove the logic board from the lower half of the phone. The logic board is connected to the remainder of the phone by two cables at the upper right corner indicated by the red circle.  Do not damage the cables.
  • Lift up the bottom of the logic board.

  • Carefully remove the logic board from the lower half of the phone.

  • The logic board is connected to the remainder of the phone by two cables at the upper right corner indicated by the red circle. Do not damage the cables.

Voeg opmerking toe

Gently lift the keyboard up with a spudger. The keyboard is now separate from the remainder of the phone and can be easily removed.
  • Gently lift the keyboard up with a spudger.

  • The keyboard is now separate from the remainder of the phone and can be easily removed.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Lid sinds: 15-04-10

133 reputatie

20 handleidingen geschreven

Team

Cal Poly, Team 28-25, Regan Spring 2010 Lid van Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Leden

20 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,190