Inleiding

These instructions will demonstrate how to remove the back plate from the KDDI Kyocera A5521K.

Onderdelen

Geen onderdelen nodig.

  1. Turn the phone over to expose the battery cover.
    • Turn the phone over to expose the battery cover.

    • Apply pressure to the back of the battery cover to slide it down.

    • The battery cover is now separate from the phone.

    Voeg opmerking toe

  2. Remove the battery by pushing it up and out from the bottom.
    • Remove the battery by pushing it up and out from the bottom.

    • The battery, cover, and phone should now be separated.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Remove the four screws with the Y0 screwdriver.

    Voeg opmerking toe

    • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

    • Remove the two screws with a Y0 screwdriver.

    Voeg opmerking toe

    • Rotate the phone 180 degrees.

    • Carefully separate the back plate from the remainder of the phone.

    • The back plate should now be detached from the rest of the phone.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Dominic Grisafe

Lid sinds: 15-04-10

157 Reputatie

10 handleidingen geschreven

Team

Cal Poly, Team 28-25, Regan Spring 2010 Lid van Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Leden

20 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 2,659