Disassembling IBM ThinkPad T42 Plastic Edge Cover

Inleiding

This guide provides instructions on how to remove the edge cover of the IBM ThinkPad T42. Removing the edge cover offers optimal access to the ThinkPad's inner mechanisms including the Wi-Fi Card, fan, speakers and more! This can be useful for cleaning purposes, refurbishment or total disassembly of the device.

Wat je nodig hebt

Stap 1 Bottom cover

Disassembling IBM ThinkPad T42 Plastic Edge Cover, Bottom cover: stap 1, afbeelding 1 van 1

Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.

Vertaal

Stap 2 Rear screws

Disassembling IBM ThinkPad T42 Plastic Edge Cover, Rear screws: stap 2, afbeelding 1 van 1

Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)

Vertaal

Stap 3 Keyboard and Trackpad

Disassembling IBM ThinkPad T42 Plastic Edge Cover, Keyboard and Trackpad: stap 3, afbeelding 1 van 1

Flip the laptop over and open the screen to access the keyboard and trackpad.
The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.
The bezel and keyboard will be loose, be careful.

Vertaal

Stap 4

Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.
Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Vertaal