Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Disassembling General Electric Telephone 2-9710A Handset

Wat je nodig hebt

  1. Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: stap 1, afbeelding 1 van 2 Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: stap 1, afbeelding 2 van 2
    • Unplug the device before proceeding.

    • Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.

    • To release the cable, gently press down on the top plastic tab of the connector.

  2. Disassembling General Electric Telephone 2-9710A Handset: stap 2, afbeelding 1 van 3 Disassembling General Electric Telephone 2-9710A Handset: stap 2, afbeelding 2 van 3 Disassembling General Electric Telephone 2-9710A Handset: stap 2, afbeelding 3 van 3
    • Remove the 7.5 mm screw.

    • Remove the screw cap.

    • Pull up the phone cord to remove it from the base.

  3. Disassembling General Electric Telephone 2-9710A Handset, Disassembling General Electric Telephone 2-9710A Handset: stap 3, afbeelding 1 van 2 Disassembling General Electric Telephone 2-9710A Handset, Disassembling General Electric Telephone 2-9710A Handset: stap 3, afbeelding 2 van 2
    • Remove the plastic cover with a Plastic Opening Tool by gently sliding the tool underneath the plastic and pry the cover off.

  4. Disassembling General Electric Telephone 2-9710A Handset: stap 4, afbeelding 1 van 1
    • Remove the paper with a Plastic Opening Tool by gently sliding the tool underneath and prying the paper away from the phone.

  5. Disassembling General Electric Telephone 2-9710A Handset: stap 5, afbeelding 1 van 2 Disassembling General Electric Telephone 2-9710A Handset: stap 5, afbeelding 2 van 2
    • Remove the rubber stopper with a Plastic Opening Tool by gently sliding the tool underneath and pry away from the phone.

  6. Disassembling General Electric Telephone 2-9710A Handset: stap 6, afbeelding 1 van 2 Disassembling General Electric Telephone 2-9710A Handset: stap 6, afbeelding 2 van 2
    • Remove the two screws.

    • Remove the 2 21mm screws by using a Philips #1 screwdriver.

  7. Disassembling General Electric Telephone 2-9710A Handset: stap 7, afbeelding 1 van 1
    • Pull apart the handset by pulling the shell away from the other half of the phone.

  8. Disassembling General Electric Telephone 2-9710A Handset: stap 8, afbeelding 1 van 2 Disassembling General Electric Telephone 2-9710A Handset: stap 8, afbeelding 2 van 2
    • Remove 3 screws attaching the logic board to shell.

    • Remove the 13mm screw with a Philips #1 screwdriver.

    • Remove the 2 13mm screws with washers with a Philips #1 screwdriver.

  9. Disassembling General Electric Telephone 2-9710A Handset: stap 9, afbeelding 1 van 2 Disassembling General Electric Telephone 2-9710A Handset: stap 9, afbeelding 2 van 2
    • Slide out the phone jack from the shell by gently lifting up the phone jack.

  10. Disassembling General Electric Telephone 2-9710A Handset: stap 10, afbeelding 1 van 1
    • Without removing the logic board completely, pivot the logic board out of shell.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Alles Rebel

Lid sinds: 09/20/12

72 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 16-59, Forte Fall 2012 Lid van Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Leden

17 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 22

Altijd: 2,678