Inleiding

This is a disassembly guide for the face of the clock, useful in the case that the face requires: maintenance, replacement, or access to the interior parts.

Onderdelen

Geen onderdelen nodig.

  1. Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.
    • Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.

    • If any additional assistance is required for this step, it is recommended to use the plastic opening tool to help pry the edges of the cover simultaneously or a suction cup if you cannot grip the rim.

    Voeg opmerking toe

  2. Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.
    • Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.

    • Be sure that you remove all three hands as well as the pin that connects them in this one step. This component should come out as a single piece.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Devin Gooding

Lid sinds: 20-01-15

104 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 19-1, Blackwell Winter 2015 Lid van USF Tampa, Team 19-1, Blackwell Winter 2015

USFT-BLACKWELL-W15S19G1

4 Leden

4 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 216