Skip to main content

Inleiding

This guide will allow you to remove the outer casing of the Canon PowerShot S80.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the knot on the wrist lanyard. Remove the battery and memory card.
    • Remove the knot on the wrist lanyard.

    • Remove the battery and memory card.

  2. Remove all screws from sides of outer casing. Begin removing the screws on the bottom of the outer casing.
    • Remove all screws from sides of outer casing.

    • Begin removing the screws on the bottom of the outer casing.

    • Remove the rest of the screws from the outer casing.

  3. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  4. Gently pull the front cover off the camera. Gently pull the front cover off the camera. Gently pull the front cover off the camera.
    • Gently pull the front cover off the camera.

  5. Open the "A/V Out Digital" cover slide, and remove the screw inside. Gently pull off the back casing. Remove the black "L" shaped piece of metal.
    • Open the "A/V Out Digital" cover slide, and remove the screw inside.

    • Gently pull off the back casing.

    • Remove the black "L" shaped piece of metal.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

BrettH

Lid sinds: 28-10-09

219 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 19-5, Maness SU 2012 Lid van Cal Poly, Team 19-5, Maness SU 2012

CPSU-MANESS-SU12S19G5

1 Lid

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 7,550