Repareer je spullen Gemeenschap Winkel

Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body

Inleiding

Disassembly

1. Flip toaster over.

2. Locate four phillips screws on the bottom of the toaster.

3. Loosen and remove.

4. Sides will pop out once screws are removed.

Wat je nodig hebt

  1. Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body, Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body: stap 1, afbeelding 1 van 1

    • 1. Flip toaster over.

    Bewerken

  2. Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body: stap 2, afbeelding 1 van 1

    • 2. Locate four phillips screws on the bottom of the toaster.

    Bewerken

  4. Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body: stap 3, afbeelding 1 van 1

    • 3. Loosen and remove using a Phillips head screwdriver

    Bewerken

  5. Disassemble Proctor Silex® 2-Slice Extra Wide Slot Toaster Body: stap 4, afbeelding 1 van 1

    • 4. Sides will pop out once screws are removed.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Carlos

Lid sinds: 07/23/13

113 Reputatie

1 Handleiding geschreven

Medailles: 6

+3 andere badges

Team

UC Santa Barbara, Team 2-5, Bradley Summer 2013 Lid van UC Santa Barbara, Team 2-5, Bradley Summer 2013

UCSB-BRADLEY-R13S2G5

6 Leden

1 handleiding geschreven

3 opmerkingen

Hi Carlos,

Before removing the cover I need to remove the PUSH LEVER.

Please forward instructions on HOW TO REMOVE THE PUSH LEVER.

Thank you.

Earle

earleb - Antwoord

I Disassembled, cleaned and put it back together.  However the purpose of the exercise was to fix the browning feature or timing issue.  the little plastic bit that goes from the browning turn knob does not function.  So the push knob does not stay down.  This results in having to hold the push knob down till the toast is done to my satisfaction.  The little plastic bit does not connect properly to the PCB or whatever else it is connected to, and so the push knob on the side of the toaster does not stay down.. Allan

Allan Rodrigues - Antwoord

To slide down the toast, the lever does not go down completely, leaving the top of bread exposed. Is there a way to adjust the depth the toast goes down? If so, could you send me instructions. Thank you

Christina - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 7

Altijd: 1,823