Ga door naar hoofdinhoud

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement

Wat je nodig hebt

  1. Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement, Unplug: stap 1, afbeelding 1 van 1
    • Before you begin, remember to disconnect the mains plug.

  2. Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 2, afbeelding 1 van 2 Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 2, afbeelding 2 van 2
    • Remove the dust extraction nozzle, blade and edge guide.

    • Refer to the instructions for the device to remove them.

  3. Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 3, afbeelding 1 van 1
    • Open wide to free up space for a better work area.

    • Using a large pat screwdriver, remove the small pin.

    • Then remove the black rod.

    • And finally unscrew the nut.

  4. Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 7, afbeelding 1 van 1
    • Here is the order of the parts to remove.

  5. Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 8, afbeelding 1 van 2 Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 8, afbeelding 2 van 2
    • Then we replace the height adjustment.

  6. Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 9, afbeelding 1 van 2 Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 9, afbeelding 2 van 2
    • Finally put each piece back in order.

    • To tighten, simply replace the tray at the bottom and hand tighten the nut.

    • With the lever, take the nut and put it in the locked position without effort

    • It should be tight but not touching the board.

  7. Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 10, afbeelding 1 van 2 Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: stap 10, afbeelding 2 van 2
    • Replace the blade, edge guide, and extraction bit on the saw.

Conclusie

to reassemble perform the steps in reverse order.

Met dank aan deze vertalers:

fr en

100%

HelloMacOS helpt ons de wereld te herstellen! Wil je bijdragen?
Begin met vertalen ›

Céline Chemineau

Lid sinds: 01/29/20

16.581 Reputatie

95 handleidingen geschreven

Team

Leroy Merlin Lid van Leroy Merlin

Community

37 Leden

239 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 22

Altijd: 1,265