Repareer je spullen Gemeenschap Winkel

Dexcom G6 Receiver Display and Front Bezel Replacement

Inleiding

This guide will show you how to disconnect the display and display frame from the motherboard.

Wat je nodig hebt

  1. Dexcom G6 Receiver Display and Front Bezel Replacement, Display and Front Bezel: stap 1, afbeelding 1 van 1

    • Unscrew the 6 Torx T5 screws from the back of the device

    Bewerken

  3. Dexcom G6 Receiver Display and Front Bezel Replacement: stap 2, afbeelding 1 van 2 Dexcom G6 Receiver Display and Front Bezel Replacement: stap 2, afbeelding 2 van 2

    • Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

    • Screen Information: Model AM0310R-04 Lot # NHT18080052

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Andrew S

Lid sinds: 07/30/21

14.993 Reputatie

8 handleidingen geschreven

Medailles: 30

+27 andere badges

4 opmerkingen

Where can the replacement parts be found? And a charging port?

Ron Magliacane - Antwoord

Also looking 2 the display. Have 2 dexcom receivers here and both with broken displays.

Jeroen - Antwoord

I'm not sure if you can find the displays anywhere. The only number (presumably model number) I could find on the screen was AM0310R-04 and the Lot Number NHT18080052.

Andrew S -

Sharewith us where we can find the displays to buy

Jeroen - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 23

Altijd: 1,013