Ga door naar hoofdinhoud

Dewalt DCF885 Switch Assembly Replacement

Wat je nodig hebt

  1. Dewalt DCF885 Switch Assembly Replacement, Battery: stap 1, afbeelding 1 van 1
    • Press the battery release button at the top of the battery.

  2. Dewalt DCF885 Switch Assembly Replacement: stap 2, afbeelding 1 van 1
    • Pull the battery away from the tool.

  3. Dewalt DCF885 Switch Assembly Replacement, Motor Assembly: stap 3, afbeelding 1 van 1
    • Remove the eight 18 mm Torx Security #10 screws.

  4. Dewalt DCF885 Switch Assembly Replacement: stap 4, afbeelding 1 van 1
    • Separate the two halves of the outer case. Set the empty side down and out of the way.

  5. Dewalt DCF885 Switch Assembly Replacement: stap 5, afbeelding 1 van 1
    • Disconnect the connector from the motor assembly.

  6. Dewalt DCF885 Switch Assembly Replacement: stap 6, afbeelding 1 van 1
    • Pull the motor away from the brush assembly.

  7. Dewalt DCF885 Switch Assembly Replacement, Brush Assembly: stap 7, afbeelding 1 van 1
    • Lift the brush assembly out of the drill case.

  8. Dewalt DCF885 Switch Assembly Replacement: stap 8, afbeelding 1 van 1
    • Pull the armature assembly apart from the brush ring assembly.

  9. Dewalt DCF885 Switch Assembly Replacement: stap 9, afbeelding 1 van 1
    • Pry the two circled connectors apart from the brush ring assembly.

  10. Dewalt DCF885 Switch Assembly Replacement: stap 10, afbeelding 1 van 1
    • The brush assembly is now removed from the drill body.

  11. Dewalt DCF885 Switch Assembly Replacement, Switch Assembly: stap 11, afbeelding 1 van 1
    • Pull the switch assembly up and out of the drill case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 18

Altijd: 1,825