Dell XPS M1530 Thermal Compound Replacement

Voor het laatst geüpdatet op December 6, 2022

15 - 30 minuten

Gemiddeld

Inleiding

First, this should be a last resort for if your computer is overheating and you have ruled out the other two options from the troubleshooting page. This guide is to help you find the thermal paste on your GPU and CPU for when the heat sink is removed.

Wat je nodig hebt

Reparatieset

Deze set bevat alle onderdelen en tools om deze handleiding te voltooien.

Arctic Silver Thermal Paste
Sale price $21.99

Onderdelen

Gereedschap

Toon meer…

iFixit krijgt commissie als je dingen koopt via deze links.

Stap 1 Battery

Dell XPS M1530 Thermal Compound Replacement, Battery: stap 1, afbeelding 1 van 1

Turn the computer upside down with the battery facing you.
Turn the computer off and disconnect the charging cable from the computer.
Failure to unplug the charging cable may result in electric shock.

Bewerken

Stap 2

Push the switch as far to the right as possible to unlock the battery.

Bewerken

Stap 3

Remove the battery using two hands and pull it away from the computer.

Bewerken

Stap 4 Heat Sink

Dell XPS M1530 Thermal Compound Replacement, Heat Sink: stap 4, afbeelding 1 van 1

Unscrew the four Phillips #1 screws holding down the back panel. Then remove one 5.8mm Phillips #1 screw labeled "M" in the middle of the back panel.
Four 3.9mm Phillips #1 screws
One 5.8mm Phillips #1 screw

Bewerken

Stap 5

Using the highlighted indent, pull up and out to remove the back panel.
The indent should provide enough grip to remove the panel with ease.

Bewerken

Stap 6

First, unscrew the six screws that are holding down the fan and heat sink with a Philips #1 screwdriver. Then use a Phillips #1 to remove the single screw near the bottom of the heat sink.
Six Silver Chrome 5.8mm Phillips #1 screws
One 5.8mm Phillips #1 screw
Remove the four screws that are holding down the CPU (the four to the top left that form a rectangle in this image) first. Unscrew them in an X pattern (eg. top left screw, bottom right screw, top right screw, bottom left screw) to minimize risk of harming CPU.

Bewerken

Stap 7

Carefully lift the fan and heat sink from the laptop.
Be careful not to pull up too hard, because the power pin is still connecting the fan to the laptop.

Bewerken

Stap 8

Use your fingers or a spudger to remove the power pin connecting the fan to the laptop by pulling it straight up off the motherboard.

Bewerken

Stap 9

Remove the fan and heat sink from the laptop.
When installing the new heat sink, do not forget to replace the thermal paste underneath the heat sink. See iFixit's Applying Thermal Paste guide for further instructions.

Bewerken

Stap 10 Thermal Compound

Dell XPS M1530 Thermal Compound Replacement, Thermal Compound: stap 10, afbeelding 1 van 2

Dell XPS M1530 Thermal Compound Replacement, Thermal Compound: stap 10, afbeelding 2 van 2

Clean the CPU, GPU and heat sink with 90% isopropyl alcohol dabbed onto a paper towel.
CPU Compound
GPU Compound
Thermal Pad
Heat sink compound
It is not necessary to replace the thermal pad, it is the soft square material.
70% isopropyl alcohol can also work if 90% is not available.