Ga door naar hoofdinhoud

Inleiding

The base cover is important as it is where the inner components of the laptop is housed. It is used to protect the parts inside from any damage. Removal of the base cover will be covered in this guide.

Onderdelen

Geen onderdelen opgegeven.

  1. Using a T5 Torx screwdriver, remove ten 3mm screws. Using a T5 Torx screwdriver, remove ten 3mm screws. Using a T5 Torx screwdriver, remove ten 3mm screws.
    • Using a T5 Torx screwdriver, remove ten 3mm screws.

  2. Lift the plastic tab. Remove two 3mm Phillips #0 screws under the plastic tab.
    • Lift the plastic tab.

    • Remove two 3mm Phillips #0 screws under the plastic tab.

  3. Lift the lower case off.
    • Lift the lower case off.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 10

Altijd: 448