Repareer je spullen Gemeenschap Winkel

Dell XPS 13 9365 2-in-1 Display Assembly Replacement

Inleiding

Use this guide to remove or replace this display assembly (screen) on your Dell XPS 13 9365 2-in-1 laptop. The display assembly on this laptop refers to the entire upper portion of the laptop, which houses the screen display.

Wat je nodig hebt

  1. Dell XPS 13 9365 2-in-1 Display Assembly Replacement, Battery: stap 1, afbeelding 1 van 1

    • Use a Torx T4 screwdriver to remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly.

    Bewerken

  2. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 2, afbeelding 1 van 1

    • Use your fingertips to lift the system badge open and reveal the single case screw.

    • Use a Phillips #000 screwdriver to remove the screw (M1.6x4) that secures the base cover to the palm-rest assembly.

    Bewerken

  3. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 3, afbeelding 1 van 1

    • Starting from the front corner of the computer, pry up the base cover using a spudger and lift the base cover off the palm-rest assembly.

    Bewerken

  4. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 4, afbeelding 1 van 1

    • Disconnect the battery cable from the system board.

    Bewerken

  5. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 5, afbeelding 1 van 1

    • Use a Phillips #000 screwdriver to remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

    Bewerken

  6. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 6, afbeelding 1 van 1

    • Use a Phillips #000 screwdriver to remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

    Bewerken

  8. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 7, afbeelding 1 van 1

    • Lift the battery off the palm-rest assembly.

    Bewerken

  9. Dell XPS 13 9365 2-in-1 Display Assembly Replacement, Display Assembly: stap 8, afbeelding 1 van 1

    • Use a Phillips #000 screwdriver to remove the screw (M1.6x2.5) that secures the wireless-card bracket to the motherboard.

    Bewerken

  10. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 9, afbeelding 1 van 1

    • Lift the wireless-card bracket off the wireless card.

    Bewerken

  11. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 10, afbeelding 1 van 1

    • Use a pair of nylon tipped tweezers to gently disconnect the antenna cables from the wireless card.

    Bewerken

  12. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 11, afbeelding 1 van 1

    • Peel off the tape that secures the display cable to the M.2 solid-state drive heatsink.

    Bewerken

  13. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 12, afbeelding 1 van 2 Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 12, afbeelding 2 van 2

    • Use a Phillips #000 screwdriver to remove the two screws (M1.6x2.5) that secure the display cable bracket to the motherboard.

    • Lift the display cable bracket off the display cable.

    Bewerken

  14. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 13, afbeelding 1 van 1

    • Use the pull tab to disconnect the display cable from the motherboard.

    Bewerken

  15. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 14, afbeelding 1 van 1

    • Disconnect the touch-screen cable from the system board (labeled "TS").

    Bewerken

  16. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 15, afbeelding 1 van 1

    • Disconnect the camera cable from the system board.

    Bewerken

  17. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 16, afbeelding 1 van 3 Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 16, afbeelding 2 van 3 Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 16, afbeelding 3 van 3

    • Open the palm-rest assembly fully and place the display assembly and palm-rest assembly face down.

    • Make sure that your surface is flat and free of objects when you lay the laptop face down.

    • Use a Phillips #000 screwdriver to remove the six screws (M2.5x3.5) that secure the display hinges to the palm-rest assembly. There are three on each side.

    Bewerken

  18. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: stap 17, afbeelding 1 van 1

    • Lift the display assembly off the palm-rest assembly.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Melissa Schlein

Lid sinds: 03/21/22

686 Reputatie

3 handleidingen geschreven

Medailles: 11

+8 andere badges

Team

University of Alabama, Team 3-4, Bedsole Spring 2022 Lid van University of Alabama, Team 3-4, Bedsole Spring 2022

UA-BEDSOLE-S22S3G4

3 Leden

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 752