Repareer je spullen Gemeenschap Winkel

Dell XPS 12 9Q33 mSATA Card Replacement

Wat je nodig hebt

  1. Dell XPS 12 9Q33 mSATA Card Replacement, Removing the Battery: stap 1, afbeelding 1 van 1

    • Slide the battery cable connector out of its system board socket.

    • Pull parallel to the motherboard, not straight up, or you will damage the socket.

    • Remove the screws that secure the battery to the palm-rest assembly.

    • Lift and remove the battery along with its cable.

    • Slide and hold the power switch for about five seconds to ground the system board.

    Bewerken

  3. Dell XPS 12 9Q33 mSATA Card Replacement, Removing the mSATA card: stap 2, afbeelding 1 van 1

    • Remove the screw that secures the mSATA card to the system board.

    • Slide and remove the mSATA card out of the mSATA-card connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Johnathan Hammond

Lid sinds: 02/28/18

44.830 Reputatie

408 handleidingen geschreven

Medailles: 25

+22 andere badges

Team

RampUP America, Inc. Lid van RampUP America, Inc.

Community

42 Leden

1.985 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 369