Ga door naar hoofdinhoud
  1. Remove the screws that secure the back cover to the computer.
    • Remove the screws that secure the back cover to the computer.

  2. Using a scribe, pry the edges of the back cover from all sides [1].
    • Using a scribe, pry the edges of the back cover from all sides [1].

    • Lift the back cover from the computer [2].

  3. Disconnect the battery cable from the connector on the system board [1].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the screws that secure the battery to the computer [2].

    • Lift and remove the battery from the computer [3].

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Johnathan Hammond

Lid sinds: 28-02-18

38.265 Reputatie

408 handleidingen geschreven

Team

Informative Technologies Inc. Lid van Informative Technologies Inc.

Community

38 Leden

1.973 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 27

Altijd: 1,688