Wat je nodig hebt
-
-
Insert the spudger under the capacitive button panel, and slide the spudger all the way around.
-
-
-
-
Using the spudger, disconnect the ribbon cable by lifting up on the connector.
-
-
-
Using the spudger, disconnect the front camera by lifting up on the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Één opmerking
do you know any website or if you guys even sell the board to him