Inleiding

Replace the Upper Fan in the computer tower to prevent overheating and computer damage.

Onderdelen

Geen onderdelen nodig.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    Voeg opmerking toe

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    Voeg opmerking toe

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    Voeg opmerking toe

    • Remove the large blue cover from the computer. There are no screws or tabs holding it in place.

    Voeg opmerking toe

    • Remove the power supply that connects the upper fan to the motherboard. The power supply has black, red, green and yellow wires.

    Voeg opmerking toe

    • Remove the rubber grommets from the base of the fan. A screwdriver or spudger may be useful.

    Voeg opmerking toe

    • Pull the upper fan out of the computer.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Tom

Lid sinds: 04-10-10

799 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 22-4, Maness Fall 2010 Lid van Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Leden

13 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 5

Altijd: 4,686