Inleiding

Replace the Heat Sink on the Motherboard to maintain optimal performance

Gereedschap

Geen gereedschap nodig.

Onderdelen

Geen onderdelen nodig.

Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
  • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Voeg opmerking toe

Lay the computer on its side; you will see a blue knob.
  • Lay the computer on its side; you will see a blue knob.

  • Turn this knob 90 deg clockwise.

Voeg opmerking toe

  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

Voeg opmerking toe

  • Remove the large blue cover from the computer, there are no screws or tabs keeping it in place.

Voeg opmerking toe

  • Press down on the release tab above the heat sink.

Voeg opmerking toe

  • Pull the heat sink out of the computer while pressing on the release tab.

  • When reassembling make sure to clean the processor and heat sink of all old thermal paste and apply new paste to the processor

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Tom

Lid sinds: 04-10-10

799 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 22-4, Maness Fall 2010 Lid van Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Leden

13 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 9

Altijd: 5,450