Ga door naar hoofdinhoud

Inleiding

If your Dell latitude ST is not powering on it may have a dead battery, or a broken power cord. If your battery still does not hold a charge you will need to replace your battery. This guide walks you through each step of how to replace the battery on your Dell Latitude ST if it is broken.

Onderdelen

Geen onderdelen opgegeven.

  1. Locate the back panel tab. Press down on the tab to remove the panel. Press down on the tab to remove the panel.
    • Locate the back panel tab.

    • Press down on the tab to remove the panel.

  2. Using a Phillips #0 screwdriver, remove the four 6mm screws attaching the inside panel to the device. Using a Phillips #0 screwdriver, remove the four 6mm screws attaching the inside panel to the device. Using a Phillips #0 screwdriver, remove the four 6mm screws attaching the inside panel to the device.
    • Using a Phillips #0 screwdriver, remove the four 6mm screws attaching the inside panel to the device.

  3. Use the blue plastic opening tool to push in the tab located on the backside of the device. Slide the tool around the edges of the device to unsnap the tabs and pry the frame off. Slide the tool around the edges of the device to unsnap the tabs and pry the frame off.
    • Use the blue plastic opening tool to push in the tab located on the backside of the device.

    • Slide the tool around the edges of the device to unsnap the tabs and pry the frame off.

  4. Remove the three 6mm Phillips #0 screws attaching the battery. Remove the three 6mm Phillips #0 screws attaching the battery. Remove the three 6mm Phillips #0 screws attaching the battery.
    • Remove the three 6mm Phillips #0 screws attaching the battery.

  5. Using your hands or a plastic opening tool, unplug the white battery cable. Push forward on the top part of the cable to disconnect it from the device. Push forward on the top part of the cable to disconnect it from the device.
    • Using your hands or a plastic opening tool, unplug the white battery cable.

    • Push forward on the top part of the cable to disconnect it from the device.

  6. Pull up on the black tab located at the top of the battery to remove the battery from the device. Pull up on the black tab located at the top of the battery to remove the battery from the device. Pull up on the black tab located at the top of the battery to remove the battery from the device.
    • Pull up on the black tab located at the top of the battery to remove the battery from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 3

Altijd: 625