Inleiding

Replacing a defective fan will stop your computer from overheating, preventing damage and increasing the life of your computer.

Onderdelen

Remove the 3.9 mm Phillips #1 screw from the battery compartment. Remove the 3.9 mm Phillips #1 screw from the battery compartment.
  • Remove the 3.9 mm Phillips #1 screw from the battery compartment.

Voeg opmerking toe

Locate the laptop battery release button lock Push the battery release in the direction of the arrow, and pull upward. Push the battery release in the direction of the arrow, and pull upward.
  • Locate the laptop battery release button lock

  • Push the battery release in the direction of the arrow, and pull upward.

Voeg opmerking toe

Remove the battery from its compartment.
  • Remove the battery from its compartment.

Voeg opmerking toe

Use an opening tool or flat tool to remove the plastic cover above the keyboard. Use an opening tool or flat tool to remove the plastic cover above the keyboard. Use an opening tool or flat tool to remove the plastic cover above the keyboard.
  • Use an opening tool or flat tool to remove the plastic cover above the keyboard.

Voeg opmerking toe

Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place. Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place.
  • Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place.

Voeg opmerking toe

Using an opening tool, carefully release the keyboard from the case. Making sure not to tear or damage the wires still connecting it to the laptop.
  • Using an opening tool, carefully release the keyboard from the case.

  • Making sure not to tear or damage the wires still connecting it to the laptop.

Voeg opmerking toe

Carfully lift the key board. Lift only about 3 - 4 inches so that the wires holding the keyboard do not get damaged. Pull on the blue tab to unplug the keyboard.
  • Carfully lift the key board.

  • Lift only about 3 - 4 inches so that the wires holding the keyboard do not get damaged.

  • Pull on the blue tab to unplug the keyboard.

Voeg opmerking toe

Remove the two 3.9mm Philips #1 screws from the case. Remove the two 3.9mm Philips #1 screws from the case.
  • Remove the two 3.9mm Philips #1 screws from the case.

Voeg opmerking toe

Remove the sixteen 3.9mm Philips #1 screws from the back. Remove the sixteen 3.9mm Philips #1 screws from the back.
  • Remove the sixteen 3.9mm Philips #1 screws from the back.

Voeg opmerking toe

Turn the computer over. Using an opening tool seperate the top cover from the rest of the frame. Do not open the computer too widely or quickly. Doing so will result in damage to the computer. Do not open the computer too widely or quickly. Doing so will result in damage to the computer.
  • Turn the computer over. Using an opening tool seperate the top cover from the rest of the frame.

  • Do not open the computer too widely or quickly. Doing so will result in damage to the computer.

Voeg opmerking toe

Remove the 3.9 mm Philips #1 screw. Unplug the fan cable. Lift fan out of compartment to remove the fan.
  • Remove the 3.9 mm Philips #1 screw.

  • Unplug the fan cable.

  • Lift fan out of compartment to remove the fan.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jordan Barham

Lid sinds: 26-01-14

402 reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 6-24, Maness Winter 2014 Lid van Cal Poly, Team 6-24, Maness Winter 2014

CPSU-MANESS-W14S6G24

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 7

Afgelopen 30 Dagen: 34

Altijd: 2,338