Inleiding

This guide will show how to add RAM or replace existing RAM on the Latitude D600

Onderdelen

Geen onderdelen nodig.

  1. Find the battery
    • Find the battery

    Voeg opmerking toe

  2. Pull the tab to release the battery
    • Pull the tab to release the battery

    Voeg opmerking toe

    • Pull the battery out

    Voeg opmerking toe

  3. Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK bij het afrekenen
    Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK
    • Find the panel underneath the microsoft product key sticker, the panel is labeled with an M

    • Unscrew the single screw above the M

    Voeg opmerking toe

    • Pull off the panel to reveal the RAM

    • RAM is held in by two tabs, pull each tab to the side and the RAM will pop up

    Voeg opmerking toe

    • Once the RAM is popped up, slowly pull it out of the slot

    Voeg opmerking toe

    • To add or replace RAM, place the memory into the slot at an angle

    • Make sure you line it up correctly

    • If it is in correctly it should stay up at an angle by itself

    • Then push down in the middle until it clicks into place

    Voeg opmerking toe

    • The RAM should be secured by the tabs where the two semi circles are on the RAM

    • If it is not secure, just gently pull it out and try again, use the images to help you out

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Joseph

Lid sinds: 16-07-14

1.427 Reputatie

6 handleidingen geschreven

Één commentaar

Almost perfect: easy; clear;

Herman - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 12

Altijd: 1,988