Not much prior knowledge is required before starting. According to Dell, however, you must have the following tools:

"‡#0 and #1 magnetized Phillips-head screwdrivers

‡ Small flat-blade screwdriver

‡ 5-mm socket wrench

‡ 7-mm socket wrench

‡ Small plastic scribe"

(Guide found at:

  1. Flip laptop over.
    • Flip laptop over.

  2. Remove the screws over the RAM door
    • Remove the screws over the RAM door

    • Open the RAM door.

    • Carefully pull the tabs over the RAM chip down - the RAM will spring up.

    • Remove the RAM from the socket and insert replacement RAM.


To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.


Lid sinds: 04-05-11

331 Reputatie

2 handleidingen geschreven


Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 2,063