Repareer je spullen Gemeenschap Winkel

Dell Latitude 3190 Power Switch Board Replacement

Geschreven door: Haley Smith (en een andere inzender)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Gemiddeld

Stappen

9

Tijd vereist

35 - 55 minuten

Secties

3

Markeringen

1

Better Introduction

Betere introductie

Verbeter deze handleiding door het afmaken of herzien van de introductie.

Inleiding

Remove and replace the power switch board of your Dell Latitude 3190 if your power button and/or volume buttons no longer work properly.

  1. Use a Phillips #0 screwdriver to remove the seven 7 mm screws securing the back case. Use a Phillips #0 screwdriver to remove the seven 7 mm screws securing the back case.

    • Use a Phillips #0 screwdriver to remove the seven 7 mm screws securing the back case.

    Bewerken

  2. Using a plastic opening tool carefully separate the plastic base cover from the rest of the laptop. Lift the bottom cover from the laptop. Lift the bottom cover from the laptop.

    • Using a plastic opening tool carefully separate the plastic base cover from the rest of the laptop.

    • Lift the bottom cover from the laptop.

    Bewerken

  3. Locate the battery.

    • Locate the battery.

    Bewerken

  5. Disconnect the battery cable located on the top of the battery. Use the spudger and disconnect the battery cable. Pull the cable out of the way.

    • Disconnect the battery cable located on the top of the battery.

    • Use the spudger and disconnect the battery cable.

    • Pull the cable out of the way.

    Bewerken

  6. Use a Phillips #0 screwdriver to remove the three 3 mm screws from the battery. Use a Phillips #0 screwdriver to remove the three 3 mm screws from the battery. Use a Phillips #0 screwdriver to remove the three 3 mm screws from the battery.

    • Use a Phillips #0 screwdriver to remove the three 3 mm screws from the battery.

    Bewerken

  7. Pull the black battery tap upwards to remove the battery. The battery adhesive is strong, do not be afraid to use force. You may need to use the spudger or opening tool as a wedge. The battery adhesive is strong, do not be afraid to use force. You may need to use the spudger or opening tool as a wedge.

    • Pull the black battery tap upwards to remove the battery.

    • The battery adhesive is strong, do not be afraid to use force. You may need to use the spudger or opening tool as a wedge.

    Bewerken

  8. Disconnect the power switch cable from the motherboard. Disconnect the power switch cable from the motherboard.

    • Disconnect the power switch cable from the motherboard.

    Bewerken

  9. Remove the two 3 mm screws that secure the power switch board on the computer. Remove the two 3 mm screws that secure the power switch board on the computer. Remove the two 3 mm screws that secure the power switch board on the computer.

    • Remove the two 3 mm screws that secure the power switch board on the computer.

    Bewerken

  10. Lift the power switchboard away from the computer. Lift the power switchboard away from the computer.

    • Lift the power switchboard away from the computer.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Haley Smith

Lid sinds: 01-09-21

296 Reputatie

2 handleidingen geschreven

Badges: 3

Team

Gateway, Team 1-5, Saknee Fall 2021 Lid van Gateway, Team 1-5, Saknee Fall 2021

GCC-SAKNEE-F21S1G5

3 Leden

6 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 47