Inleiding

Use this guide to remove the back panel in order to access internal components or replace the panel.

Onderdelen

Geen onderdelen nodig.

  1. Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you. Flip the device over so the backside is facing you.
    • Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you.

    • Flip the device over so the backside is facing you.

  2. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  3. Using the Phillips #1 screwdriver, remove all nine 7mm screws.
    • Using the Phillips #1 screwdriver, remove all nine 7mm screws.

  4. Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device. Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.
    • Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device.

    • Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Christopher Gravelle

Lid sinds: 23-10-18

706 Reputatie

7 handleidingen geschreven

Team

UMass Dartmouth, Team S1-G2, Simcock Fall 2018 Lid van UMass Dartmouth, Team S1-G2, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G2

3 Leden

7 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 52