Inleiding

This guide will serve as a prerequisite for more advanced replacement guides, this base cover will rarely actually need to be replaced in it of itself.

Onderdelen

Geen onderdelen nodig.

Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
  • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

  • Turn the laptop over to its back.

Voeg opmerking toe

Slide the release latch while simultaneously pulling backwards on the battery.
  • Slide the release latch while simultaneously pulling backwards on the battery.

Voeg opmerking toe

Slide the battery out of the battery bay.
  • Slide the battery out of the battery bay.

Voeg opmerking toe

Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.
  • Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.

  • The screws are connected to the base cover by a washer anddo not remove from the base cover.

Voeg opmerking toe

Carefully lift the base cover vertically away from the laptop. Carefully lift the base cover vertically away from the laptop.
  • Carefully lift the base cover vertically away from the laptop.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Nathan Lemay

Lid sinds: 16-04-14

2.491 Reputatie

15 handleidingen geschreven

Team

Cal Poly, Team 9-14, Regan Spring 2014 Lid van Cal Poly, Team 9-14, Regan Spring 2014

CPSU-REGAN-S14S9G14

4 Leden

15 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 20

Altijd: 1,289