Inleiding

Because the model device does not have a hard drive, this is not a replacement guide, but merely a prerequisite guide for other removal guides.

Onderdelen

Geen onderdelen nodig.

  1. Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.
    • Make sure the display is closed. Then, flip the computer over so that you can see the bottom cover.

    • Loosen the two 5 mm Phillips #0 on the upper edge of the cover.

      • These screws will stay captive to the case.

    Voeg opmerking toe

  2. Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.
    • Remove the two 5 mm interior screws that connect the cover to the assembly using the same Philips head screwdriver from the previous step.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Use a spudger to remove the base cover from the rest of bottom cover.

    As it is not clearly visible in the picture: You should start to open the base cover at the screen side, to avoid breaking the plastic guides of the base cover. A flat dough scraper is a pretty good tool for that.

    David Jatzke - Antwoord

  4. Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Jean Whitmore

Lid sinds: 22-01-15

920 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 18-2, Maness Winter 2015 Lid van Cal Poly, Team 18-2, Maness Winter 2015

CPSU-MANESS-W15S18G2

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 13

Afgelopen 30 Dagen: 72

Altijd: 5,461