Inleiding

Is your computer experiencing trouble with connecting to the internet? Consider using this guide to replace the network adapter card in your laptop.

Onderdelen

Geen onderdelen nodig.

  1. Use a Phillips #0 screwdriver to remove the 9.6 mm screws securing the back plate of the laptop.
    • Use a Phillips #0 screwdriver to remove the 9.6 mm screws securing the back plate of the laptop.

  2. Use a prying tool to remove the back plate.
    • Use a prying tool to remove the back plate.

    • Use a Phillips #0 screwdriver to remove the three 3 mm screws holding the battery in place.

    • Disconnect the cable connecting the battery to the motherboard, and then remove the battery

    • Use a Phillips #0 screwdriver to remove the 3mm screw and the metal bracket that holds the network adapter card in place.

    • Pull out the network card.

    • To completely remove the network card, disconnect the two cords (white and black) from the adapter card. White on 1 and Black on 2.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Raj Dhavalikar

Lid sinds: 10-11-18

133 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S4-G4, Wilson Fall 2018 Lid van IUPUI, Team S4-G4, Wilson Fall 2018

IUPUI-WILSON-F18S4G4

4 Leden

2 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 9

Altijd: 59