Ga door naar hoofdinhoud

Inleiding

In this guide, we will show you how to remove and replace the Hard drive.

Onderdelen

Geen onderdelen opgegeven.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer.

    • CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.

    • Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

  2. Slide and lift the hard-drive assembly off the palm rest and keyboard assembly. Slide and lift the hard-drive assembly off the palm rest and keyboard assembly.
    • Slide and lift the hard-drive assembly off the palm rest and keyboard assembly.

  3. Remove the screws that secure the hard-drive bracket to the hard drive.
    • Remove the screws that secure the hard-drive bracket to the hard drive.

  4. Lift the hard drive from the hard-drive bracket. Lift the hard drive from the hard-drive bracket.
    • Lift the hard drive from the hard-drive bracket.

  5. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
    • Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.

  6. Replace the screws that secure the hard-drive bracket to the hard drive.
    • Replace the screws that secure the hard-drive bracket to the hard drive.

  7. Slide and connect the hard-drive assembly to the connector on the system board.
    • Slide and connect the hard-drive assembly to the connector on the system board.

  8. Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly
    • Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly

  9. Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
    • Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Terrence15

Lid sinds: 18-12-17

78.107 Reputatie

441 handleidingen geschreven

Team

Informative Technologies Inc. Lid van Informative Technologies Inc.

Community

38 Leden

1.960 handleidingen geschreven

Één commentaar

Can we replace the harddisk with SSD. Will that increase the performance of the laptop?

Winada Effendi - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 47

Altijd: 4,896