Inleiding
The armature allows electrical current to go through the device and provide power to the grinding wheel. Without the armature, there would be no torque or power to spin the grinder. This guide will show how to replace it.
Wat je nodig hebt
-
-
Remove the four T15 Torx screws from the front of the grinder and remove the face plate from the body.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Team
Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019 Lid van Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019
OIT-LANCASTER-S19S2G9
4 Leden
5 handleidingen geschreven
