Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Replacing the o-ring is simple. This would be done to replace a damaged or dried o-ring.

  1. Flip open the top panel to reveal water reservoir. Grab the water reservoir by the handle and lift out.
    • Flip open the top panel to reveal water reservoir.

    • Grab the water reservoir by the handle and lift out.

  2. Reach into the reservoir while holding it from the bottom.
    • Reach into the reservoir while holding it from the bottom.

    • Push up the piston.

    • While pushing the piston up, pull the O-ring out.

Conclusie

To reassemble your device, follow these instructions in reverse order.

David Griffith

Lid sinds: 01-10-15

1.390 Reputatie

9 handleidingen geschreven

Team

Cal Poly, Team 4-2, Maness Fall 2015 Lid van Cal Poly, Team 4-2, Maness Fall 2015

CPSU-MANESS-F15S4G2

4 Leden

18 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 22

Afgelopen 30 dagen: 80

Altijd: 1,425