Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Onderdelen

Geen onderdelen opgegeven.

  1. Flip open the top panel to reveal water reservoir. Grab the water reservoir by the handle and lift out.
    • Flip open the top panel to reveal water reservoir.

    • Grab the water reservoir by the handle and lift out.

  2. Before flipping the device, removed the black container and grill.
    • Before flipping the device, removed the black container and grill.

    • Flip the device on its head, front end facing you.

    • Using the Phillips #2 unscrew the two 52 mm screws found underneath the top portion of the device.

  3. Flip the device back to its proper orientation.
    • Flip the device back to its proper orientation.

    • Using the Phillips #2 screwdriver remove the two 52 mm screws found on the lip next to the reservoir.

  4. OPEN ALLE TABBLADEN

    RAM-upgradekits voor Mac

    Koop kits

    Genoeg RAM
    voor al je tabbladen

    Koop kits
  5. Insert the two plastic opening tools beneath the top knob. Use the two plastic opening tools as leverage to lift the top knob off.
    • Insert the two plastic opening tools beneath the top knob.

    • Use the two plastic opening tools as leverage to lift the top knob off.

  6. Grasp the lid firmly with both hands.
    • Grasp the lid firmly with both hands.

    • Pull mightily with both hands away from the device.

    • If you hear a slight snapping sound, it is supposed to do that.

  7. Use a plastic opening tool to push in the slot on the back panel while lifting. Similarly, reach into where the reservoir used to be and insert a plastic spudger underneath the  inside panel.
    • Use a plastic opening tool to push in the slot on the back panel while lifting.

    • Similarly, reach into where the reservoir used to be and insert a plastic spudger underneath the inside panel.

    • We recommend to not use your fingers for this step because there is a chance they will be pinched.

  8. You are now ready to lift the top off. Place one hand near the back, the other at the front, and lift.
    • You are now ready to lift the top off.

    • Place one hand near the back, the other at the front, and lift.

    • You may want to lift the front and back individually by pulling one a little off the part before the other. Afterwards, lifting the top off entirely will be easier.

Conclusie

To reassemble your device, follow these instructions in reverse order.

David Griffith

Lid sinds: 01-10-15

1.390 Reputatie

9 handleidingen geschreven

Team

Cal Poly, Team 4-2, Maness Fall 2015 Lid van Cal Poly, Team 4-2, Maness Fall 2015

CPSU-MANESS-F15S4G2

4 Leden

18 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 43