Ga door naar hoofdinhoud

DOSS SoundBox Speaker Replacement

Wat je nodig hebt

  1. DOSS SoundBox Speaker Replacement, Speaker: stap 1, afbeelding 1 van 2 DOSS SoundBox Speaker Replacement, Speaker: stap 1, afbeelding 2 van 2
    • Use the JIS #00 screwdriver to remove the 3/32" screws that secure the speaker to the body.

    • Remove the smaller 3/32" screws that secure the left side of the speaker with a JIS #1 screwdriver.

    • The smaller screws are still the same length, but they have smaller screw heads. You can use the same screwdriver for both.

    • Using a Magnetic Mat throughout this process will help prevent losing screws.

  2. DOSS SoundBox Speaker Replacement: stap 2, afbeelding 1 van 2 DOSS SoundBox Speaker Replacement: stap 2, afbeelding 2 van 2
    • Use the Plastic Opening Tool to gently lift the speaker enough to see the connected wires.

  3. DOSS SoundBox Speaker Replacement: stap 3, afbeelding 1 van 2 DOSS SoundBox Speaker Replacement: stap 3, afbeelding 2 van 2
    • Use a soldering iron to de-solder the two speaker wires from the speaker itself.

    • The speakers are ready to be removed and replaced.

    • Ensure that the device is turned off when handling bare wire.

    • Soldering iron is very hot.

Conclusie

To reassemble your device, follow instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Één opmerking

The instructions say: "The speakers are ready to be removed and replaced." But nowhere in this article am I told where to get replacement speakers. Am I just on my own for that? This website has always been so helpful in providing links for such things. :(

Janie Thurman - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 26

Altijd: 2,613