Ga door naar hoofdinhoud

Inleiding

This guide will demonstrate step by step detailed instructions on how to safely remove and replace the Mobile Device Holder of a DJI Phantom 4 Advanced Remote Controller.

Someone who might want to replace the mobile device holder is because it doesn’t clamp the phone properly or it is broken.

  1. Remove the  6.7 mm Flathead screw using a Flathead 4 mm screwdriver.
    • Remove the 6.7 mm Flathead screw using a Flathead 4 mm screwdriver.

  2. Loosen the bolt that is connected to the body by hand.
    • Loosen the bolt that is connected to the body by hand.

  3. PC Laptop batterijen

    An easy fix for a big power boost.

    Nu winkelen

    PC Laptop batterijen

    An easy fix for a big power boost.

    Nu winkelen
  4. Lift up and disconnect the bracket from the body.
    • Lift up and disconnect the bracket from the body.

  5. Replace the mobile device holder with a new one.
    • Replace the mobile device holder with a new one.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Abdullah Muslih Abdul Samad

Lid sinds: 22-05-19

229 Reputatie

2 handleidingen geschreven

Team

IUPUI, Team S1-G1, Harley Summer 2019 Lid van IUPUI, Team S1-G1, Harley Summer 2019

IUPUI-HARLEY-SU19S1G1

3 Leden

2 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 4

Altijd: 36