Repareer je spullen Gemeenschap Winkel

DJI Phantom 4 Advanced Remote Controller Battery Replacement

Inleiding

The battery can be considered the heart of the device. Without it, the devices will not work and will be useless.

So that your enjoyment does not get ruined by a dead battery, this guide provides instructions on how to replace the battery on the DJI Phantom 4 Advanced Remote Controller.

Wat je nodig hebt

  1. DJI Phantom 4 Advanced Remote Controller Battery Replacement, Back Panel: stap 1, afbeelding 1 van 1

    • Remove the four screws with a Torx T8 screwdriver to access the back con board.

    Vertaal

  2. DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 2, afbeelding 1 van 2 DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 2, afbeelding 2 van 2

    • Remove three screws using a Phillips #00 screwdriver.

    Vertaal

  3. DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 3, afbeelding 1 van 2 DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 3, afbeelding 2 van 2

    • With tweezers, gently remove the large con board tab.

    • Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

    Vertaal

  5. DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 4, afbeelding 1 van 2 DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 4, afbeelding 2 van 2

    • Peel off the rubber grips to access the screw holes.

    • Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.

    • Remove the back board and set it aside.

    Vertaal

  6. DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 5, afbeelding 1 van 2 DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 5, afbeelding 2 van 2

    • Pull apart the back plastic panel.

    • Recommended tool for this would be the metal spudger, but not required.

    • Once the back panel is off, you will have access to the motherboard.

    Vertaal

  7. DJI Phantom 4 Advanced Remote Controller Battery Replacement, Battery: stap 6, afbeelding 1 van 1

    • The battery is attached to the back plastic, and is towards the bottom of the remote.

    • Unplug the cord that is connected to the bottom of the main board.

    Vertaal

  8. DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 7, afbeelding 1 van 1

    • After the cord is unplugged, remove the battery by lifting upon the plastic cover, which the battery is attached to.

    Vertaal

  9. DJI Phantom 4 Advanced Remote Controller Battery Replacement: stap 8, afbeelding 1 van 1

    • Once the cover is off you can access the battery.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

4 opmerkingen

Grrrrrreat Job!

Rick Artman - Antwoord

Wo kann ich den Akku bestellen? Danke für die Hilfe!

Xl S - Antwoord

does someone know where to buy the akku?

Xl S - Antwoord

Ich habe ein Erzatz Akku eingesetzt mit den gleichen Strom Werten, beim aufladen stelle ich fest das der Akku nicht ladet..

Es blinkt bloß ( schnell) auf einer LED.

Wo kann die Ursache liegen.

Matthias Meier - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 24

Afgelopen 30 dagen: 131

Altijd: 12,185