Ga door naar hoofdinhoud

D-Link DIR-890L Motherboard Replacement

Wat je nodig hebt

  1. D-Link DIR-890L Motherboard  Replacement, Case: stap 1, afbeelding 1 van 3 D-Link DIR-890L Motherboard  Replacement, Case: stap 1, afbeelding 2 van 3 D-Link DIR-890L Motherboard  Replacement, Case: stap 1, afbeelding 3 van 3
    • Peel off the four rubber rectangular feet with your fingers.

    • The feet may be hard to remove. Apply additional force if necessary.

  2. D-Link DIR-890L Motherboard  Replacement: stap 2, afbeelding 1 van 3 D-Link DIR-890L Motherboard  Replacement: stap 2, afbeelding 2 van 3 D-Link DIR-890L Motherboard  Replacement: stap 2, afbeelding 3 van 3
    • Unscrew the 5mm screws in each corner using the Phillips #1 screwdriver.

  3. D-Link DIR-890L Motherboard  Replacement: stap 3, afbeelding 1 van 3 D-Link DIR-890L Motherboard  Replacement: stap 3, afbeelding 2 van 3 D-Link DIR-890L Motherboard  Replacement: stap 3, afbeelding 3 van 3
    • Wedge the opening tool between the red top panel and the gray bottom panel.

    • Twist the opening tool to separate the panels. Work your way around the case until both of the panels are separated.

  4. D-Link DIR-890L Motherboard  Replacement, Motherboard: stap 4, afbeelding 1 van 1
    • Orient the router so the narrow end of the router faces you and the ports face away from you.

    • The six, hot-glued antenna connections are in the middle and at the top right of the motherboard.

  5. D-Link DIR-890L Motherboard  Replacement: stap 5, afbeelding 1 van 3 D-Link DIR-890L Motherboard  Replacement: stap 5, afbeelding 2 van 3 D-Link DIR-890L Motherboard  Replacement: stap 5, afbeelding 3 van 3
    • Pry off the antenna connectors using a heavy-duty spudger.

  6. D-Link DIR-890L Motherboard  Replacement: stap 6, afbeelding 1 van 2 D-Link DIR-890L Motherboard  Replacement: stap 6, afbeelding 2 van 2
    • Continue to pry off the last three antenna connections on the upper right portion of the motherboard.

  7. D-Link DIR-890L Motherboard  Replacement: stap 7, afbeelding 1 van 3 D-Link DIR-890L Motherboard  Replacement: stap 7, afbeelding 2 van 3 D-Link DIR-890L Motherboard  Replacement: stap 7, afbeelding 3 van 3
    • Open the plastic bracket enclosing the three antenna wires and pull the wires out with your hands.

  8. D-Link DIR-890L Motherboard  Replacement: stap 8, afbeelding 1 van 3 D-Link DIR-890L Motherboard  Replacement: stap 8, afbeelding 2 van 3 D-Link DIR-890L Motherboard  Replacement: stap 8, afbeelding 3 van 3
    • Pull the yellow tape off of the motherboard to release the final antenna wire.

  9. D-Link DIR-890L Motherboard  Replacement: stap 9, afbeelding 1 van 2 D-Link DIR-890L Motherboard  Replacement: stap 9, afbeelding 2 van 2
    • Pull the the motherboard away from the case to remove it. Start on the side closest to you, and pull up and out.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Rachel Shaw

Lid sinds: 10/06/16

553 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 10-7, Livingston Fall 2016 Lid van Cal Poly, Team 10-7, Livingston Fall 2016

CPSU-LIVINGSTON-F16S10G7

4 Leden

12 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 15

Altijd: 2,273