Repareer je spullen Gemeenschap Winkel

Cuisinart DCC-1100 Hot Plate Replacement

Inleiding

This guide will help you replace the hot plate of the Cuisinart DCC-1100. Please have a replacement hot plate ready for the installation and unplug the machine before beginning work.

Wat je nodig hebt

  1. Cuisinart DCC-1100 Hot Plate Replacement, Hot Plate: stap 1, afbeelding 1 van 1

    • Unplug the coffee maker.

    Bewerken

  2. Cuisinart DCC-1100 Hot Plate Replacement: stap 2, afbeelding 1 van 1

    • Remove the coffee pot and place the coffee maker upside down.

    Bewerken

  3. Cuisinart DCC-1100 Hot Plate Replacement: stap 3, afbeelding 1 van 1

    • Remove the five 1.6mm Phillips #1 screws from the bottom panel.

    Bewerken

  5. Cuisinart DCC-1100 Hot Plate Replacement: stap 4, afbeelding 1 van 1

    • Remove the bottom panel.

    Bewerken

  6. Cuisinart DCC-1100 Hot Plate Replacement: stap 5, afbeelding 1 van 1

    • Remove the two 1.6mm Phillips #0 screws from the retaining bracket on the heating element.

    Bewerken

  7. Cuisinart DCC-1100 Hot Plate Replacement: stap 6, afbeelding 1 van 1

    • Remove the retaining bracket and allow it to hang off of the heating element.

    Bewerken

  8. Cuisinart DCC-1100 Hot Plate Replacement: stap 7, afbeelding 1 van 1

    • Remove the hot plate from the heating element.

    • New thermal paste should be applied at time of installation.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Josh Harvey

Lid sinds: 01/25/18

886 Reputatie

4 handleidingen geschreven

Medailles: 11

+8 andere badges

Team

USF Tampa, Team S20-G4, Passmore Spring 2018 Lid van USF Tampa, Team S20-G4, Passmore Spring 2018

USFT-PASSMORE-S18S20G4

4 Leden

7 handleidingen geschreven

13 opmerkingen

thank you for this informative display.

I have broken many expensive glass carafs for my cuisinart coffeemaker and finally purchased a cuisinart thermal caraf.

I do not need the hotplate to heat, so what do I do to stop the heating process?

I imagine I would need to remove one of the attached lines to the heating element, yes?

Thanks.

Luciano

luciano1213@msn.com

Luciano Muzzatti - Antwoord

Hi, Thanks for sharing this information. I have an older Krups coffee maker that still works great but the hot plate is warn. I cannot seem to find a replacement plate for any Krups coffee maker models. Any suggestions? Thanks!

Paulette Paglia - Antwoord

Josh

where do I buy the replacement hot plate?? I have the sis 15 coffeemaker and I have googled all over the place?? Thank u

linkev428 - Antwoord

Yes, where do you buy the part??

Kathy Johnston - Antwoord

Yes my question is where do you get the new hot plate? Any direction appreciated.

DougB - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 31

Altijd: 6,129