Repareer je spullen Gemeenschap Winkel

Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement

Inleiding

If your Crock-Pot Express Crock Multi-Cooker does not seal properly, use this guide to replace your bobber valve.

Wat je nodig hebt

  1. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: stap 1, afbeelding 1 van 3 Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: stap 1, afbeelding 2 van 3 Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Lid: stap 1, afbeelding 3 van 3

    • Orient the crock pot where the lid locked and unlocked icons are visible.

    • Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other.

    • Remove the lid.

    Bewerken

  3. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement, Bobber Valve: stap 2, afbeelding 1 van 1

    • Flip the lid over and expose plastic washer.

    Bewerken

  4. Crock-Pot Express Crock Multi-Cooker Bobber Valve Replacement: stap 3, afbeelding 1 van 1

    • Pull the plastic washer off the bobber valve and allow the bobber valve to fall out

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

7 opmerkingen

Ok I followed your directions but the new valve just keeps calling out?

dpataky1952 - Antwoord

First time I used this but the bobber valve ports steam and does not stop ( unit is brand new )

Archerkc - Antwoord

would be nice to see the other side of this. is it just supposed to be a hole on the outside up top? it is letting out air…when im trying to pressure cook.

shaycooks2 - Antwoord

Ditto I was wanting to know the same thing!

kate2272 -

Ditto. Mine does the same thing.. suggestions?

Tina Royce - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 28

Afgelopen 30 dagen: 132

Altijd: 26,351