Onderdelen

Geen onderdelen nodig.

  1. Use a Flathead Screwdriver to remove the 6.5mm screw holding the belt clip to Nomad II.
    • Use a Flathead Screwdriver to remove the 6.5mm screw holding the belt clip to Nomad II.

      • When reassembling, do not overtighten the screw. That may create a crack in the plastic back cover and the new belt clip.

    Voeg opmerking toe

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Remove the belt clip.
    • Remove the belt clip.

    • Install new belt clip.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nathan

Lid sinds: 26-01-12

1 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 9-2, Regan Winter 2012 Lid van Cal Poly, Team 9-2, Regan Winter 2012

CPSU-REGAN-W12S9G2

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,370