Repareer je spullen Gemeenschap Winkel

Crain Jamb Saw 775 2014 Blade Replacement

Inleiding

This guide will demonstrate how to replace the blade in your Crain 775 Jamb Saw.

Wat je nodig hebt

  1. Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: stap 1, afbeelding 1 van 3 Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: stap 1, afbeelding 2 van 3 Crain Jamb Saw 775 2014 Blade Replacement, Unfasten the blade: stap 1, afbeelding 3 van 3

    • Unplug the power cord before you begin.

    • The saw blade is sharp, in order to prevent injury, you may want to wear protective gloves when handling it.

    • Depress the spindle lock button to prevent the blade from spinning when you unfasten it.

    • While depressing the spindle lock, use a 3/16 hex key to remove the socket set screw securing the blade in place.

    Bewerken

  3. Crain Jamb Saw 775 2014 Blade Replacement, Remove the blade: stap 2, afbeelding 1 van 2 Crain Jamb Saw 775 2014 Blade Replacement, Remove the blade: stap 2, afbeelding 2 van 2

    • Remove the blade.

    • When replacing with a new blade, ensure the two pegs on the face of the rotor mate with the holes in the blade.

    • Tighten the new blade with the socket set screw firmly before use. Ensure the spindle lock is pulled before turning the saw on.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

Tarun Thiruma

Lid sinds: 11/20/19

35.673 Reputatie

134 handleidingen geschreven

Medailles: 32

+29 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 337