Ga door naar hoofdinhoud

Craig CMP801 Back Cover Replacement

Wat je nodig hebt

  1. Craig CMP801 Back Cover Replacement, Back Cover: stap 1, afbeelding 1 van 2 Craig CMP801 Back Cover Replacement, Back Cover: stap 1, afbeelding 2 van 2
    • Locate the opening line between the cover and the device. Then locate the groove near the charging port.

  2. Craig CMP801 Back Cover Replacement: stap 2, afbeelding 1 van 2 Craig CMP801 Back Cover Replacement: stap 2, afbeelding 2 van 2
    • Use a metal spudger to separate the back cover from the front touch screen.

    • To do this, place the metal spudger in between the groove near the charging port of the device to unlatch the first clip.

  3. Craig CMP801 Back Cover Replacement: stap 3, afbeelding 1 van 2 Craig CMP801 Back Cover Replacement: stap 3, afbeelding 2 van 2
    • Continue to separate all of the clips around the device until the back cover comes off completely.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Duyen

Lid sinds: 09/25/17

281 Reputatie

2 handleidingen geschreven

Één opmerking

Como puedo habilitarle lo puerto usb ya k por error lo deshabilita en la bio y ahora me esta dando el error shell2.40 y no me funciona ni el clado ni el mouse en mi icraig cmp 801 bun

Jeyser Garcia - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 6

Altijd: 551