Corsair Dark Core RGB PRO SE Right Side Hand Grip Replacement

Inleiding

If you replace the hand grip on your Corsair Dark Core RGB PRO SE gaming mouse it can fit in your hand better and benefit gameplay by changing the grip. It is a quick and easy process that will benefit you. This guide will provide step-by-step instructions with images to replace the hand grip.

Stap 1 Right Side Hand Grip

Corsair Dark Core RGB PRO SE Right Side Hand Grip Replacement, Right Side Hand Grip: stap 1, afbeelding 1 van 1

Find the crevice or gap between the mouse itself and the right hand grip.

Bewerken

Stap 2

Place your pointer finger on the gap on the bottom of the mouse and your thumb on the top gap. Apply slight force and pull the grip off.
An alternative to pulling the grip off is to pinch at the bottom gap and side, pinching the grip off.
The standard, original, right hand grip is stuck to the mouse due to internal magnets. This is the mild resistance pulling against you.

Bewerken

Stap 3

Hover the replacement grip closely over the area where the original side grip previously was and the new replacement grip should fit nicely into place due to the internal magnets.

Bewerken