Inleiding

If you think that your hair dryer's fan motor is being clogged with loose hair, use this guide to remove the motor for cleaning.

Onderdelen

Geen onderdelen nodig.

Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
  • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

  • Hold the hair dryer by the handle so that the back panel faces up.

Voeg opmerking toe

Remove the two 15.875 mm Phillips #2 screws from the back panel. Remove the two 15.875 mm Phillips #2 screws from the back panel.
  • Remove the two 15.875 mm Phillips #2 screws from the back panel.

Voeg opmerking toe

Starting from where the cord attaches to the handle, pull apart the two plastic panels. Continue separating the back panel, working along the seam. With moderate force, completely remove the back panel from the hair dryer.
  • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

  • Continue separating the back panel, working along the seam.

  • With moderate force, completely remove the back panel from the hair dryer.

Voeg opmerking toe

Hold the hair dryer by the nozzle so that the handle points to the left. Remove the two 1-inch Phillips #2 screws from the back of the fan motor.
  • Hold the hair dryer by the nozzle so that the handle points to the left.

  • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

Voeg opmerking toe

Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns. Pull on the back of the fan motor to gently lift the motor out of the hair dryer. Lift the attached electrical wiring and heat shield completely out of the hair dryer.
  • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

  • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

  • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Timothy Lo

Lid sinds: 22-04-14

890 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 10-58, Amido Spring 2014 Lid van Cal Poly, Team 10-58, Amido Spring 2014

CPSU-AMIDO-S14S10G58

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 13

Afgelopen 30 Dagen: 47

Altijd: 2,576